Aor Ar3000a Control Software

I own an AOR AR3000A scanner receiver. Is there a digital decoding software package I can use with this classic radio? Is a radio from way back in the 90's compatible with DSD or DSD+? I own two scanner radios popular in the 1990’s- AOR AR 3000A’s. Each radio has a port in the back for a 25 pin serial cable. Each has a switch on the backside labeled: Remote: on off. FREE control software for the AR8600 and AR8200 radio scanners. The AR8600/8200 communications receivers can be controlled via a serial port of your computer, using a standard RS-232 cable. Ar86ctrl is a control program for the AOR® AR8600 and AR8200 communications receivers. Control software Free sample control software. Workshop V2.0.6 - Limited featurers, No support. Only compatible up to Windows 2000 (XP, Vista, 7, 8.1, 10 will not work) (2.2MB) ZIP: ARL2300 ETHERNET CONTROLLER: NEW! ARL2300discover.jar Utility to discover the ARL2300 and get its IP address to access the settings page (9kB) JAR. Software Download Weitere Infos und Links hier unten. Klick und aufklappe.

AOR AR3000A and AR3000A PLUS

Click on picture for larger image

Science 6    math and science. The AR3000A was an evolutionary step forward from the highly acclaimed AR3000, many major improvements have been implemented at the request of enthusiastic listeners and commercial organisations. Search and Scan speed has been increased to an unprecedented 50 increments per second.

Your listening horizons are truly extended with receive coverage from l00KHz all the way up to 2036MHz without any gaps in the range. The AR3000A offers the widest coverage on the market today with a high level of performance and versatility from long wave through shortwave, VHF and onward to the upper limits of UHF and SHF.

The high level of performance is achieved by using 15 band Pass filters before the GaAsFET RF amplifiers unlike other receivers which may rely largely on broad band amplifiers.

This ensures high sensitivity through the entire coverage with outstanding dynamic range and freedom from intermodulation effects

Not only will the AR3000A cover this extremely wide range it will allow listening n any mode: NFM, WFM, AM, USB, LSB and CW.

Ar3000a

Tuning rates are selectable from ultra-fine 50Hz step for SSB and CW right the way up to 999.95kHz for the TV and VHF broadcast band, x 10 increase and x5 decrease tuning rate buttons have been provided on the front panel to increase versatility .and operational pleasure. A free running rotary tuning control provides the best possible method of user interface especially when listening in the SSB modes.

Control

An RS232 port is provided enabling full remote control Via most computers, control facilities include: Frequencies, Receiver mode, Frequency steps, Writing to/from memory, Signal strength, RF attenuator, Memory bank changeover etc. A rear panel switch changes control between the keypad and RS232 port.

The large comprehensive front panel Liquid Crystal Display (LCD) has an improved 12 o'clock viewing angle which provides a multitude of information such as Search. Scan, Frequency, Memory and additional functions such as Memory bank and Second function. Illumination is provided to increase visibility in areas of low level lighting. The display includes a real time clock for accurate log keeping, there is also a timer and tape output socket for unattended monitoring.

400 memory channels are provided in 4 banks x 100 channels. Each memory channel will retain mode, frequency, RF attenuator setting and lockout status. The first channel of each memory bank may be used as a priority channel providing four channels in total. All memory and search programmed information is retained by an internally fitted lithium battery

The implementation of a more efficient microprocessor has not only lead to greater stability and additional facilities but also increased scanning and search speeds. Front panel memory clear and microprocessor reset facilities are now available.

No less than four search banks are provided, each bank can be programmed by the user to operate anywhere within the tuning range of the receiver. As an aid to searching l00 individual frequencies can be locked out of each of the four search banks to prevent the receiver stopping on continuously occupied frequencies. Enhanced programmable hold and variable pause facilities have been added to the search, scan and priority, this ensures the very highest level of versatility.

The AR3000A is powered from 13.8V DC, a suitable mains power supply is provided with the receiver. Other accessories include a telescopic whip. DC lead and operating manual.

Aor Ar3000a Control Software Downloads

The AR3000A Plus is a customised AR3000A with several enhancements:

Aor Ar3000a Control Software Developer

  • A Switchable narrower AM filter for shortwave listening
  • A Switchable narrow WFM filter for satellite reception
  • 10.70MHz I.F. output via a BNC connector added to the rear of the set with a toggle switch for SDU5000 AGC/mute.
  • Discrimenator output to the AUX socket plus tape relay for better compatibility with tape recorders including VOX operated machines.

The AR3000 and AR3000A via the external RS232 connection on the rear of the radio can be controlled externally via a Computer. There are several Software packages that support both the AR3000 and AR3000A. AOR produce Searchlight for Windows whilst two alternative packages are ScanCat Pro & Scan*Star Commercial. For further information click here.

E-Mail Javiation for further information

Javiation On-Line Order form

Aor Radios For Sale

All Pages Copyright © Javiation 2000

Aor 5000 Receiver