Driver Magician 5.3 With Crack [Latest] Fix

Driver Magician Crack. Driver Magician Crack driving force magician gives an expert answer for tool drivers backup, recovery and update in home windows working system. It identifies all the hardware inside the device, extracts their associated drivers from the tough disk and backs them up to a place of your desire. The Magician SSD management utility is designed to work with all Samsung SSD products including 470 Series, 750 Series, 830 Series, 840 Series, 850 Series, 860 Series, 870 Series, 960 Series, 970 Series and 980 Series.

Having problems with your laser cutter or software? Try our new community forum:

Getting the installation program

The Lasercut 5.3 installation files can be downloaded here. Extract the files from the zipped archive to a new directory.

The archive contains 3 folders,

  • Lasercut 5.3 – Control Software. This is used to prepare the cutting files before sending them to the laser
  • Driver – Softdog USB Dongle. An additional driver for the USB dongle if you are using a 64 bit version of Windows 7
  • Driver – Laser Cutter. The driver to connect directly to the laser cutter.

In a typical install all the required drivers will be set up as part of the Lasercut Installer, the additional drivers are only provided for completeness. Mac os x sierra app store.

Installing Lasercut 5.3

Run the “Setup.exe” program from within the LaserCut 5.3 folder, this will start the installation of Lasercut 5.3

Install Lasercut using the default settings. The ‘Lasercut53′ type is a standalone version of Lasercut which can be used in demonstration mode without the need for the softdog dongle. Like most older programs Lasercut prefers to run from the default paths.

The program will install Lasercut, the drivers for the USB dongle and the drivers for the laser cutter. Once complete navigate to the newly created folder to start the program.

Checking the Drivers

Connect both the Laser cutter and the USB dongle to the computer. If the drivers have installed correctly then they will appear in the device manager as shown above. If the USB dongle has not installed correctly it will appear as EZ-USB-FX2 with a warning symbol next to it. To manually update the driver right click to item in device manager. Select Update driver and then manually select the folder downloaded in the first step. Windows will then determine which driver is best for your version of windows and update appropriately.

Running Lasercut 5.3

There are two versions of Lasercut located within the program path, a full version and a demonstration version.

The full version of Lasercut, “Lasercut53.exe”, will only run if the softdog USB dongle is connected to the computer. This version gives you complete control over the laser cutter. You can download jobs to the laser, adjust the cutting position and start a job all from within Lasercut.

The demo version of Lasercut, “Lasercut53_Demo.exe”, will run even if the softdog USB dongle is not present. This version of the software has limited capabilities; in particular it does not allow you to save your work and it does not connect to the laser cutter (the program will crash if this is attempted). There are workarounds which allow you to prepare files while using the demonstration version.

Selecting the appropriate Laser cutter

For the first execution of the lasercut program simply run the appropriate labelled “.bat” file from the install directory.

Lasercut extracts laser cutter information from the “syscfg.ini” file stored next to its executable. This file contains information about the size of the machine, the maximum speed of the axis and lots of other data. When the “bat” file is run it simply copies the appropriate configuration file for the target machine and replaces the “syscfg.ini” file with it. The bat file then launches the Lasercut application. Each time Lasercut is run from this point onwards it will refer to the target machine. These “bat” files are particularly useful when one computer is used to connect to multiple sizes of laser cutter.

Working with the Demo Mode

Most laser cutter software requires the user to prepare their files on the one computer that currently has the USB dongle. In communal workspaces this can cause a bottle neck on the laser cutter while people wait for the dongle and the laser cutter is not actually in use during most of this time. The demo mode can be used to prepare cutting files without the USB dongle and without being attached to the laser cutter. There are two methods for transferring files from the demo mode to the laser cutter, cutting files can be made that are transferred directly to the laser, or Lasercut files can be saved and opened when the user does have the USB dongle. The method for creating cutting files is much more reliable and it is advisable to do this before attempting to save the Lasercut files.

Creation of cutting files for the laser

Driver Magician Crack

Once the file has been prepared in the demo mode, click the download button in the bottom right hand corner in the same way you would if the laser was connected.

Lasercut will create a warning message to indicate that the Laser cutter is not actually connected to the computer, but the software will progress to the download page anyway.

Once on the download page the user can still click “Export file”, this creates a series of cutting files. The laser cutter can read these files directly from a USB stick when it is inserted into the machine.

Creation of Lasercut Files

In the demonstration mode the standard save functions have been all been disabled, however when the application attempts to exit the user is still presented with an option to save their work. This oversight can be used to create Lasercut files while running in demo mode. As mentioned before though it is advisable to create cutting files before trying this because if something does go wrong the application will have exited and the work will be lost.

3.9 MB

Uninstall Removed Hardware Driver

When you replace the graphic card, do you know Windows still keep your old one driver, and will launch it each time, when Windows start up. This will case the system slowing boot up, and may case some system conflict. Driver Easy allow you uninstall the removed hardware, to clean up your system.

Your One-Stop Driver Solution

Driver Easy is design for quickly and easy to identify unknown device's drivers, and keep your driver in latest version. Much more, we have implement driver backup, driver restore, and driver uninstall feature, to ensure your driver secure and safe.

Smart 'Auto-Installation'

Driver Magician 5.3 Registration Key

This smart feature is our Industry first technology! It enable user to install the driver automatically ,even help you extract, analyze & install it. What you need to do is to click your mouse once or twice.

Download Windows Update more faster

Start from Driver Easy 4.0, we have add a new Windows Update tools, with the smart download server picker, and 2 ~ 5 concurrency download, let you download and install windows update faster than ever.

Keep Existing Driver Up-to-Date

With our daily update driver database, your system will improve the performance, fix the blue screen problem, add more enhance feature by install the latest drivers.

Backup & Restore Drivers

Do not worry about it if you lost the driver disc, Driver Easy can backup the driver your current installed, you can restore it after system reload. This is an benefit feature if you not sure are the new driver compatible your system or not, you can backup existing driver, and roll-back it later.


Uninstall Removed Hardware Driver

When you replace the graphic card, do you know Windows still keep your old one driver, and will launch it each time, when Windows start up. This will case the system slowing boot up, and may case some system conflict. Driver Easy allow you uninstall the removed hardware, to clean up your system.


  • Automatically Detect Unknown Device Drivers
  • Keep your Drivers Up-to-Date
  • Over 1,000,000 Hardware Driver Database
  • Driver Backup, Restore & Uninstall Features
  • Download Windows Update 2x ~ 5x Faster
  • FREE for Personal Use
  • Multi-Language Interface
  • Extremely Easy-to-Use

What's New:

  • Fix an auto-update bug
  • Amend an Hungarian translation

Software similar to DriverEasy 4

Driver Magician Keygen

  • 359 votes
    One of the main reasons why you would want to collect installed drivers is if you don’t have the Driver CD that came with the computer or they are unavailable online.
    • Freeware
    • Windows
  • 32 votes
    Device driver backup, restoration and update tool for Windows.
    • Free to Try
    • Windows
  • 40 votes
    Driver Fusion is the complete driver solution for your PC.
    • Freeware
    • Windows