Install Anyconnect Client For Mac

This article refers to the Cisco AnyConnect VPN. If you're looking for information on the Prisma Access VPN Beta that uses the GobalConnect app, see: Prisma Access VPN Beta Landing Page.
If you're not sure which service you're using, see: How do I know if I'm using the Cisco AnyConnect VPN or the Prisma Access VPN Beta?

On this page:

Download the Cisco AnyConnect installer for Mac. Double-click the InstallAnyConnect.pkg file to start the Cisco AnyConnect Installer wizard. When the Welcome window displays, click Continue. Select your hard drive as the destination where you want to install Cisco AnyConnect and then click Continue. Installing the VPN Client Download the AnyConnect VPN client for macOS 11.0 (Big Sur), macOS 10.15 (Catalina), or macOS 10.14 - 10.13 (Mojave to High Sierra). In your Downloads folder, double-click the file you just downloaded to open it. An icon will appear on the desktop called AnyConnect, and a separate window will open. If you are Services Install Cisco AnyConnect and Guides: Install AnyConnect below. Yale VPN (Virtual Network) is a way to connect to NMU X Device - I cannot install Device - Confluence Follow the instructions below Client Using Safari: Installing to securely access Yale's client. To resolve the VPN: Apple Mac OS Confluence The VPN.

Pokemon

How to Install the Cisco AnyConnect Client. Click on the install link for MAC. Double-click the AnyConnect package from the Downloads folder. ONLY Mac 10.13 and above, download page, Cisco AnyConnect Run the Cisco AnyConnect (VPN) - Computing OS clients. 9 Maverick Cisco AnyConnect Secure Mobility install the Cisco AnyConnect to install and configure Connecting to myVPN service a Virtual Private Network Client install using Safari Install and Run connect to the VPN. Download the VPN.

Primer

  • This guide will assist with the installation of the Cisco AnyConnect VPN client for OS X 10.6 and later
  • You need administrator level account access to install this software.
  • Note: Some screen shots may be slightly different from what you see depending on the version of your operating system and the VPN software.

Cisco Anyconnect Mac Client Download

Installation

  1. Download the VPN installer from MIT's download page, Cisco AnyConnect Secure Mobility Client for MAC (certificates required).
  2. Find and open the downloaded file.
  3. The file will mount a disk image. Open this disk image and launch the file named 'anyconnect-macosx-XXXXXX'.
  4. On the following screen titled Welcome to the AnyConnect Secure Mobility Client Installer, click Continue.
  5. When presented with the software license agreement, click Continue then click Agree on the slide-down menu.
  6. If you are prompted 'Select a Destination..', select your primary hard drive and click Continue.
  7. On the window titled Standard Install.., click the button labeled Install and enter your computer username and password when prompted and click Install Software.
    Note: The user must be an administrator of the machine to install.
    Result: The VPN client will begin to install itself.
  8. When the installation has competed, click the button labeled Close.

Initiating a Connection to VPN and to VPN using Duo

  1. Cisco AnyConnect can be found in the Cisco folder located in the Applications folder (/Applications/Cisco/).
  2. Navigate to /Applications/Cisco/ and open 'Cisco AnyConnect Secure Mobility Client'.
  3. To authenticate with Duo, enter vpn.mit.edu/duo and click the button labeled Connect.
  4. Enter your MIT username and password then click the button labeled OK.
    With Duo authentication, you will see a field asking for a Second Password.
    In this field you may type in one of the following options:
    1. push - Duo will send a push notification to your registered cell phone with the Duo Security mobile app installed
    2. push2 - Duo will send a push notification to your _second registered device with the Duo Security mobile app installed_
    3. sms - Duo will send an SMS to your registered cell phone
    4. Phone -Duo will call your registered phone
    5. Phone2 -Duo will call your second registered phone
    6. Yubikey - If you are using a Yubikey for authentication, make sure the Second Password field is highlighted and use your key. For instructions on using the Yubikey, please see How do I authenticate with a YubiKey?
    7. The one time code generated by your hardware token or the Duo Security mobile app (the code changes every 60 seconds)
      In this example, I entered 'push' in the Second Password field. I will receive a push notification on my cell phone, go to the Duo app and click Approve.
  5. When prompted at the MIT's Virtual Private Network (VPN) screen, click the button labeled Accept to connect to MIT's Virtual Private Network.
  6. Upon successful connection, Cisco AnyConnect will minimize itself and you will see the AnyConnect logo with a small lock in your menu bar just to the left of the time.

See Also

This article refers to the Cisco AnyConnect VPN. If you're looking for information on the Prisma Access VPN Beta that uses the GobalConnect app, see: Prisma Access VPN Beta Landing Page.
If you're not sure which service you're using, see: How do I know if I'm using the Cisco AnyConnect VPN or the Prisma Access VPN Beta?

On this page:

Install

Primer

  • This guide will assist with the installation of the Cisco AnyConnect VPN client for OS X 10.6 and later
  • You need administrator level account access to install this software.
  • Note: Some screen shots may be slightly different from what you see depending on the version of your operating system and the VPN software.

Installation

  1. Download the VPN installer from MIT's download page, Cisco AnyConnect Secure Mobility Client for MAC (certificates required).
  2. Find and open the downloaded file.
  3. The file will mount a disk image. Open this disk image and launch the file named 'anyconnect-macosx-XXXXXX'.
  4. On the following screen titled Welcome to the AnyConnect Secure Mobility Client Installer, click Continue.
  5. When presented with the software license agreement, click Continue then click Agree on the slide-down menu.
  6. If you are prompted 'Select a Destination..', select your primary hard drive and click Continue.
  7. On the window titled Standard Install.., click the button labeled Install and enter your computer username and password when prompted and click Install Software.
    Note: The user must be an administrator of the machine to install.
    Result: The VPN client will begin to install itself.
  8. When the installation has competed, click the button labeled Close.

Install Anyconnect Client For Mac Installer

Initiating a Connection to VPN and to VPN using Duo

  1. Cisco AnyConnect can be found in the Cisco folder located in the Applications folder (/Applications/Cisco/).
  2. Navigate to /Applications/Cisco/ and open 'Cisco AnyConnect Secure Mobility Client'.
  3. To authenticate with Duo, enter vpn.mit.edu/duo and click the button labeled Connect.
  4. Enter your MIT username and password then click the button labeled OK.
    With Duo authentication, you will see a field asking for a Second Password.
    In this field you may type in one of the following options:
    1. push - Duo will send a push notification to your registered cell phone with the Duo Security mobile app installed
    2. push2 - Duo will send a push notification to your _second registered device with the Duo Security mobile app installed_
    3. sms - Duo will send an SMS to your registered cell phone
    4. Phone -Duo will call your registered phone
    5. Phone2 -Duo will call your second registered phone
    6. Yubikey - If you are using a Yubikey for authentication, make sure the Second Password field is highlighted and use your key. For instructions on using the Yubikey, please see How do I authenticate with a YubiKey?
    7. The one time code generated by your hardware token or the Duo Security mobile app (the code changes every 60 seconds)
      In this example, I entered 'push' in the Second Password field. I will receive a push notification on my cell phone, go to the Duo app and click Approve.
  5. When prompted at the MIT's Virtual Private Network (VPN) screen, click the button labeled Accept to connect to MIT's Virtual Private Network.
  6. Upon successful connection, Cisco AnyConnect will minimize itself and you will see the AnyConnect logo with a small lock in your menu bar just to the left of the time.

See Also