Redcine X Pro For Mac Free Download

REDCINE-X PRO Does Not Recognize Footage Symptom. REDCINE-X PRO does not recognize R3D footage. Potential Resolutions. Update REDCINE-X PRO to the latest version. Update your computer to the latest software. Offline Clips and an Extra R3D File Symptom. After mounting an SSD to your computer, REDCINE-X PRO shows that all or most clips are. Trusted Windows (PC) download REDCINE 31.6.16. Virus-free and 100% clean download. Get REDCINE alternative downloads. Thank you for downloading REDCINE-X PRO para Mac from our software library. This application is distributed free of charge. The download was scanned for viruses by our system. We also recommend you check the files before installation. The download is provided as is, with no modifications or changes made on our side.

Release Date:

10/15/2020

Release Notes

REDCINE-X Professional Build v52.2.50136 – Windows (64-Bit) Build

Download redcine new version for free. Design & Photo downloads - REDCINE-X PRO by Red Giant Software LLC and many more programs are available for instant and free download.

System Requirements

  • 64-bit Windows Vista to Windows 10 (version 1809)
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)
  • Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THISBUILD

  • Added: CUDA Ampere support.
  • Added: Additional pre-defined source resolutions to the Framing Control.
  • Enhanced: White Balance Picker accuracy for very warm and very cool colors.
  • Fixed: A Framerate metadata display issue.
  • Fixed: Exporting with Fix Width selected, doesn't always maintain the original aspect ratio.
  • Fixed: Export ignoring Framing Origin X and Y settings.
  • Fixed: Framing Guide alignment issue that was setting Frame Guide X and Y to 0.
  • Fixed: Incorrect Highlight Roll Off default value so it now matches camera default of Soft.
  • Fixed: Incorrect Highlight Roll Off and Tone Map metadata when REDWideGamutRGB is selected in camera.


To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2020 RED.COM, LLC. All rights reserved.

Release Date:

7/9/2020

Release Notes

REDCINE-X Professional Build v52.1.49582 – Windows (64-Bit) Build

System Requirements

  • 64-bit Windows Vista to Windows 10 (version 1809)
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)
  • Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THISBUILD

  • Fixed: 3D LUT Preview issues.
  • Fixed: MAC OS issues loading 3D LUTs.
  • Fixed: Frame rendering issue.
  • Fixed: Removed some repeating verbose log lines.
  • Fixed: REDCINE-X and REDline fail to export to Avid AAF & MXF if the source clip contains a bad frame.
  • Fixed: Cleaned up some Command History entries.
  • Fixed: Camera PIN metadata.
  • Fixed: R3D Trim issues for clips with camera 3D LUTs.
Known Issues
  • Scaled exporting to OpenEXR, with the CUDA GPU image processing, can result in corrupted images. This will be fixed in a patch release.


To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2020 RED.COM, LLC. All rights reserved.

Release Date:

5/14/2020

Release Notes

REDCINE-X Professional Build v52.0.49422 – Windows (64-Bit) Build

System Requirements

  • 64-bit Windows Vista to Windows 10 (version 1809)
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)
  • Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THISBUILD

  • Added: Ability to create AP0 Color Space Creative Luts.
  • Added: IPP2 Image : Noise Reduction [M]eta and [D]efault buttons.
  • Added: REDline CDL output file name can now be specified. If not specified it use the clip's output file name root.
  • Added: REDline and REDCINE-X PRO now include the clip's UUID in their metadata display.
  • Added: REDline metadata now includes the original file name.
  • Added: Playback Device checkbox to the System Preferences tab, to optimize CUDA playback for a specific CUDA card.
  • Added: Bypass IPP2 Output Transform.
  • Added: CDL Enable.
  • Fixed: Slower playback with multiple CUDA GPUs decoding than with one.
  • Fixed: Playback isn't as smooth as it should be when the system can't keep up with the requested frame rate.
  • Fixed: Occasional issues displaying the first frame when multiple GPUs are in use.
  • Fixed: Moving any of the middle User Curve points to either edge resets all the curve points.
  • Fixed: Using the back arrow to scrub backwards in the timeline yields unexpected results.
  • Fixed: Viewer will occasionally jump to the wrong frame when some settings are changed.
  • Fixed: REDline image artifacts.
  • Fixed: RED Player has issues playing some clips.
  • Fixed: LL indicator not displaying.
  • Fixed: Look Preset issues with Creative 3D LUT setting
  • Fixed: Curve adjustments not being applied in legacy mode.
  • Fixed: Exporting an occasional black horizontal line at top of image.
  • Fixed: Problems switching export between Fully Graded and Primary Raw.
  • Fixed: NVidia Series M & K cards don't work.
  • Fixed: Post : Image : Effects image corruption issues.
  • Fixed: Project Clip's Frame Rate Selection dialog box doesn't indicate if 71.928 and 72 FPS are selected.
  • Fixed: Some controls on Tangent controllers are not working.
  • Fixed: Excessive logging when trimming.
  • Fixed: Rocket-X not used with IPP2 and GPU enabled.
  • Fixed: IPP2 Image : Primary [M]eta and [D]efault buttons don't work.
Known Issues
  • Scaled exporting to OpenEXR, with the CUDA GPU image processing, can result in corrupted images. This will be fixed in a patch release.


To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2020 RED.COM, LLC. All rights reserved.

Release Date:

4/23/2019

Release Notes

Redcine X Windows

REDCINE-X Professional Build v51.0.47074 – Windows (64-Bit) Build

System Requirements

  • 64-bit Windows Vista to Windows 10 (version 1809)
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)
  • Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

Redcine x pro download

CHANGES IN THISBUILD

  • Added: Windows accelerated R3D decompression on supported NVIDIA CUDA GPUs
  • Added: Chroma Noise Reduction in IPP2 (On/Off)
  • Added: Flashing Pixels (Off, Mild, Medium, Strong)
  • Added: Image: Noise Reduction Panel
    • NOTE: Image Noise Reduction features are only available in Full Debayer for the Viewer Window and in Full and Half Premium Debayer for Export
    • NOTE: To add/remove panels, right-click in a panel and select a panel from the drop-down menu.
  • Added: New half resolution premium debayering in IPP2
  • Added: HDR support for select AJA and Blackmagic Design devices
  • Added: Viewer Window IPP2 / Primary Development Only view toggle
  • Added: REDline CDL export
  • Added: REDline Primary Development Only export
  • Added: Monitor Out preferences page
  • Added: Left and Right frame cropping
  • Added: Startup splash screen
  • Enhanced: Cleaned up the default REDCINE-X Pro Home Page
  • Enhanced: ProRes 4444 XQ no longer restricted to just log output
  • Enhanced: ProRes encoder now sets Rec.2020 and HDR-2084 metadata
  • Enhanced: Creative 3D LUT ALT-key Preview mode lock
  • Fixed: RMD file Creative 3D LUT fixes
  • Fixed: Marker loading issues


To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2019 RED.COM, LLC. All rights reserved.


Download Release Notes

Release Date:

7/20/2018

Release Notes

REDCINE-X Professional Build 50.5 Release – Windows (64-bit) Build

System Requirements

  • 64-bit Windows Vista or later
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)

CHANGES IN THISBUILD

  • Fixed: REDWideGamutRGB output incorrectly had gamut mapping applied in the standard (Full_Graded) IPP2 image processing pipeline.
  • Fixed: Corrupt thumbnail image if the Poster Frame was out of range.
  • Fixed: Issue created in v50.4 that stopped Creative 3D LUTs from being saved to Projects and Look Presets.

Note: REDROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Note: NVIDIA Cuda acceleration requires compute capability 2.0 or higher capable GPU on Mac with the latest NVIDIA Cuda Driver.
Note: NVIDIA/AMD OpenCL acceleration requires OpenCL 1.1 or higher capable GPU.

Copyright © 2004-2018 RED.COM, LLC. All rights reserved.

Release Date:

7/3/2018

Release Notes

REDCINE-X Professional Build 50.4 Release – Windows (64-bit) Build

System Requirements

  • 64-bit Windows Vista or later
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 2GB GPU Video RAM (when using GPU acceleration)

CHANGES IN THISBUILD

  • Added: Shift Arrow support for Sliders.
  • Added: Save the Creative 3D LUT sidecar when creating a R3D snapshot.
  • Fixed: OpenCL memory problems.
  • Fixed: Regression issue in high frequency handling in IPP2 demosaic or when DEB is enabled in Legacy mode.
  • Fixed: Scopes pixel value location.
  • Fixed: Export Preset’s Image Pipeline settings not sticking.
  • Fixed: HLG rendering artifacts.
  • Fixed: Missing audio for incomplete DSMC clips.

Note: REDROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Note: NVIDIA Cuda acceleration requires compute capability 2.0 or higher capable GPU on Mac with the latest NVIDIA Cuda Driver.
Note: NVIDIA/AMD OpenCL acceleration requires OpenCL 1.1 or higher capable GPU.

Copyright © 2004-2018 RED.COM, LLC. All rights reserved.

Release Date:

10/11/2016

Release Notes

REDCINE-X Professional Build 42 Release – Windows (64-bit) Build

System Requirements

  • Mac OS X 10.7 or later
  • 64-bit Windows Vista or later
  • 1GB hard drive space
  • 8GB RAM (recommended)
  • 1GB GPU Video RAM (when using GPU acceleration)

CHANGES IN THISBUILD
Added: HELIUM 8K accelerated decoding with REDROCKET-X + GPU (high-end GPU recommended).
Added: Log3G10 and REDWideGamutRGB gamma and color space options (available when Advanced Controls are enabled).
Fixed: Possible decode issues for HELIUM sensor clips.
Fixed: Waveform Mode menu is no longer disabled on app load.
Fixed: Issue applying 3D LUTs in REDLINE.

Note: REDROCKET support requires driver 2.1.23.0 and firmware 1.1.18.0 or higher.
Note: REDROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Note: NVIDIA Cuda acceleration requires compute capability 2.0 or higher capable GPU on Mac with the latest NVIDIA Cuda Driver.
Note: NVIDIA/AMD OpenCL acceleration requires OpenCL 1.1 or higher capable GPU.

Trusted mac cleaner virus protection. Trusted Mac Cleaner Virus From Mac A computer virus is a piece of code (sometimes as little as 1 line, or as large as a complete program) to which is capable of copying itself and typically has a detrimental effect to a PC, such as corrupting the system, destroying data or gathering personal information.

Copyright © 2004-2017 RED.COM, LLC. All rights reserved.

Redcine X Pro software, free download For Mac

  • Download

If your download is not starting, click here.

Thank you for downloading REDCINE-X PRO from our software library

The download was scanned for viruses by our system. We also recommend you to check the files before installation. The download version of REDCINE-X PRO is 50.1. The download is provided as is, with no modifications or changes made on our side. REDCINE-X PRO is distributed free of charge.

REDCINE-X PRO antivirus report

This download is virus-free.This file was last analysed by Free Download Manager Lib 102 days ago.

KASPERSKY

NOD32

MCAFEE-GW-EDITION

WebAdvisor

Redcine X Pro Mac

Often downloaded with

Redcine X Pro Download

  • Defender Pro 5-in-1Defender Pro 5-in-1 2010 Internet security software provides essential online..$19.99DOWNLOAD
  • PDF Pro 10The all-new PDF Pro will revolutionize the way you work with PDF files. PDF..$49.97DOWNLOAD
  • Tech-Pro CodeSignCode signing just got easier! Tech-Pro CodeSign is a graphical shell for the..DOWNLOAD
  • iDVR-PRO CMSiDVR Pro CCTV Surveillance DVR Software.This is the most up to date DVR client..DOWNLOAD
  • Hangman ProHangman Pro (also known as Hangman for Windows, and the successor to Hang3001)..$14.95DOWNLOAD