Tp Link Eap Controller For Mac
Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
Networking Interface | Gigabit Ethernet (RJ-45) Port *1(Support IEEE802.3at PoE) |
Buttons | Reset |
Antennas | Internal Omni 2.4GHz: 3* 4dBi 5GHz: 3*4dBi |
Wifi Standards | IEEE 802.11ac/n/g/b/a |
Power Supply | PoE or External 12VDC / 1.5A Power Supply |
Maximum Power Consumption | 12.7 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Frequency | 2.4GHz and 5GHz |
Signal Rate | 5GHz:Up to 1300Mbps 2.4GHz:Up to 450Mbps |
Wireless Functions | Multiple SSIDs(Up to 16 SSIDs, 8 for each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client |
Wireless Security | Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
Transmission Power | CE: ≤19dBm(2.4GHz) ≤23dBm(5GHz) FCC: ≤25dBm(2.4GHz) ≤27dBm(5GHz) MANAGEMENT EAP Controller Software Yes Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP Yes System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS L3 Management Yes Multi-site Management Yes Management VLAN Yes |
Omada Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | Yes |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
Management VLAN | Yes |
Certification | CE, FCC, RoHS |
Package Contents | AC1750 Wireless Dual Band Gigabit Access Point EAP245 Power Adapter Mounting Kits Installation Guide |
System Requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Launch Omada Controller and log in to the management interface. Click on the upper right corner of the management interface. Go to Wireless Control Free Authentication Policy. Click and configure the policy. IP-Mac based mode. 1) Specify the Match Mode as IP-Mac based. TP-Link SMB Community Business Wi-Fi NO MAC OS EAP controller software MAC OS EAP controller software. Reply NO MAC OS EAP controller software. WHY is the no EAP controller software for the MAC OS. Subscribe; Bookmark; Report Inappropriate Content; Reply [email protected] 2018-06-11 12:57:07. This video will show you how to set up and configure your EAP(s). Flexsim for mac. EAPs deliver strong Wi-Fi to hundreds of customers across multiple access points. This chapter describes how to configure TP-Link Omada Controller and EAP AP.Before proceeding further with the configuration, you need to have a%DEVICE% configured with a domain and a gateway as described in Adding a New Gateway. All other parameters are optional and you can leave as they are. Once saved, the configuration is now.


Tp Link Eap 220
Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
Networking Interface | Gigabit Ethernet (RJ-45) Port *1(Support IEEE802.3at PoE) |
Buttons | Reset |
Antennas | Internal Omni 2.4GHz: 3* 4dBi 5GHz: 3*4dBi |
Wifi Standards | IEEE 802.11ac/n/g/b/a |
Power Supply | PoE or External 12VDC / 1.5A Power Supply |
Maximum Power Consumption | 12.7 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Frequency | 2.4GHz and 5GHz |
Signal Rate | 5GHz:Up to 1300Mbps 2.4GHz:Up to 450Mbps |
Wireless Functions | Multiple SSIDs(Up to 16 SSIDs, 8 for each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client |
Wireless Security | Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
Transmission Power | CE: ≤19dBm(2.4GHz) ≤23dBm(5GHz) FCC: ≤25dBm(2.4GHz) ≤27dBm(5GHz) MANAGEMENT EAP Controller Software Yes Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP Yes System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS L3 Management Yes Multi-site Management Yes Management VLAN Yes |
Omada Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | Yes |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
Management VLAN | Yes |
Certification | CE, FCC, RoHS |
Package Contents | AC1750 Wireless Dual Band Gigabit Access Point EAP245 Power Adapter Mounting Kits Installation Guide |
System Requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |